![](http://p.yzimgs.com/global/12541/zh-cn/1669965188366.jpg)
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制,過濾,分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量儀器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德爾格Draeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼(MICRONICS)超...
- 美國AII氧分析儀
- 美國Raytek紅外測溫儀
- 美國Fike火災,爆炸和卸壓產品
產品詳情
簡單介紹:
6400-TSG Total Sulfur in Fuel Gas Analyzer 燃料中總硫氣體分析儀
使用紫外熒光檢測技術
6400專業的火焰燃燒器采用模塊,現場證實紫外熒光技術(FCCM)檢測氣體流中的所有含硫化合物。該分析儀包括采樣調節系統,以妥善處理,維護量極小的樣本組成,其中包括燃料/可燃?xì)怏w的品種
詳情介紹:
6400-TSG Total Sulfur in Fuel Gas Analyzer 燃料中總硫氣體分析儀
使用紫外熒光檢測技術
6400專業的火焰燃燒器采用模塊,現場證實紫外熒光技術(FCCM)檢測氣體流中的所有含硫化合物。該分析儀包括采樣調節系統,以妥善處理,維護量極小的樣本組成,其中包括燃料/可燃?xì)怏w的品種.
優勢。
范圍從0-200 ppb到百分之水平 - 高達10 ppb的低檢測。
連續閱讀更新 - 無開關閥服務。
非消耗品傳感技術。
高溫火焰的FCCM確保完成硫的轉化。
沒有FCCM維修**兩年服務的預期。
沒有純粹的氧作為一種實用工具所需的氣體。
單個和多個測序流配置。
I類1區(1區)和I級2區(2區)配置。
6400天生操作理論。
目前的**硫化合物(如硫化氫,DMS的,職業導向,CH3SH,二硫化碳等)轉換成二氧化硫(SO2)的**控制下,溫度和流量的條件。
二氧化硫+高壓1 - 。>二氧化硫*-> +高壓2 **%%**.二氧化硫SO2是當暴露在紫外線光能量,hv1,它創建了一個“興奮”的二氧化硫,二氧化硫的形式*.在高一,激發態分子的振動能級,二氧化硫*,將很快就會來的*低水平振動能量通過碰撞失去其他分子。當熒光分子返回到它的電子基態。該所發出的光,hv2,強度成正比的總硫含量的樣本中發現。
當熒光分子返回到它的電子基態。該所發出的光,hv2,強度成正比的總硫含量的樣本中發現。
大的型號6400 -天生火焰燃燒器采用了模塊(FCCM),它提供了下一個氫火焰強度目前完全燃燒含硫化合物轉化。該FCCM方法*適合的應用場合氣相分析樣品可以是穩態或有氫氣或碳?xì)浠衔锏暮坎町惡艽蟆?/span>此外,F(xiàn)CCM辦法還規定一個真正的不斷的分析提供了一個總樣氣中的硫含量現狀的實時顯示。該FCCM是生吃或未經提煉的燃料氧化能力不焦化,不載氣或開關閥是必要的。
轉換后的樣氣干燥,然后遞過來的紫外熒光分析儀6400E型二氧化硫分析哪里發生,可以方便地為總硫顯示。
應用領域:
煉油廠(蒸汽甲烷重整,火炬 - 第1118,傳入燃料).
天然氣加工廠(硫化氫 - 酸性氣體的去除).
碳二氧化質量控制(德驅馳)。
Using UV-Fluorescence detection technology
The 6400-TSG utilizes a flame combustion converter module (FCCM) with field-proven UV-Fluorescence technology to detect all sulfur compounds in a gas stream. The analyzer includes sample conditioning system to properly handle a variety of sample compositions, including fuel/combustible gases, with minimal maintenance.
Advantages
The undesirable sulfur compounds present (i.e. H2S, DMS, COS, CH3SH, CS2, etc) are converted into sulfur dioxide (SO2) under precisely controlled temperature and flow conditions.
SO2 + hv1 -> SO2*-> SO2 + hv2
When SO2 is exposed to UV light energy, hv1, it creates an "excited" form of sulfur dioxide, SO2*. A molecule in a high, vibrational level of the excited state, SO2*, will quickly fall to its lowest vibrational level by losing energy to other molecules through collision. Fluorescence occurs when the molecule returns to its electronic ground state. The intensity of the emitted light, hv2, is directly proportional to the total sulfur content found in the sample.
TAI'S Model 6400-TSG utilizes a flame combustion converter module (FCCM) which provides a complete combustion conversion of the sulfur compounds present under the intensity of a hydrogen flame. The FCCM approach is best suited for gas phase applications where the analyzed sample is either steady-state or having a wide variation in the hydrogen or hydrocarbon content. Furthermore, the FCCM approach also provides a truly continuous analysis providing a real-time indication of the total sulfur content present in the sample gas. The FCCM is capable of oxidizing raw or unrefined fuels without coking and no carrier gas or switching valves are necessary.
The converted sample gas is dried, then fed to the Model 6400E UV Fluorescence Analyzer where the SO2 Analysis takes place and is conveniently displayed as Total Sulfur.
Applications Areas:
使用紫外熒光檢測技術
6400專業的火焰燃燒器采用模塊,現場證實紫外熒光技術(FCCM)檢測氣體流中的所有含硫化合物。該分析儀包括采樣調節系統,以妥善處理,維護量極小的樣本組成,其中包括燃料/可燃?xì)怏w的品種.
優勢。
范圍從0-200 ppb到百分之水平 - 高達10 ppb的低檢測。
連續閱讀更新 - 無開關閥服務。
非消耗品傳感技術。
高溫火焰的FCCM確保完成硫的轉化。
沒有FCCM維修**兩年服務的預期。
沒有純粹的氧作為一種實用工具所需的氣體。
單個和多個測序流配置。
I類1區(1區)和I級2區(2區)配置。
6400天生操作理論。
目前的**硫化合物(如硫化氫,DMS的,職業導向,CH3SH,二硫化碳等)轉換成二氧化硫(SO2)的**控制下,溫度和流量的條件。
二氧化硫+高壓1 - 。>二氧化硫*-> +高壓2 **%%**.二氧化硫SO2是當暴露在紫外線光能量,hv1,它創建了一個“興奮”的二氧化硫,二氧化硫的形式*.在高一,激發態分子的振動能級,二氧化硫*,將很快就會來的*低水平振動能量通過碰撞失去其他分子。當熒光分子返回到它的電子基態。該所發出的光,hv2,強度成正比的總硫含量的樣本中發現。
當熒光分子返回到它的電子基態。該所發出的光,hv2,強度成正比的總硫含量的樣本中發現。
大的型號6400 -天生火焰燃燒器采用了模塊(FCCM),它提供了下一個氫火焰強度目前完全燃燒含硫化合物轉化。該FCCM方法*適合的應用場合氣相分析樣品可以是穩態或有氫氣或碳?xì)浠衔锏暮坎町惡艽蟆?/span>此外,F(xiàn)CCM辦法還規定一個真正的不斷的分析提供了一個總樣氣中的硫含量現狀的實時顯示。該FCCM是生吃或未經提煉的燃料氧化能力不焦化,不載氣或開關閥是必要的。
轉換后的樣氣干燥,然后遞過來的紫外熒光分析儀6400E型二氧化硫分析哪里發生,可以方便地為總硫顯示。
應用領域:
煉油廠(蒸汽甲烷重整,火炬 - 第1118,傳入燃料).
天然氣加工廠(硫化氫 - 酸性氣體的去除).
碳二氧化質量控制(德驅馳)。
Series 6400-TSG Total Sulfur in Fuel Gas Analyzer |
Using UV-Fluorescence detection technology
Series 6400-TSG Total Sulfur Analyzer | |
|
|
Advantages
- Ranges from 0-200 ppb to percent levels - detection as low as 10 ppb
- Continuous reading updates - no switching valve to service
- Non-consumable sensing technology
- High-temperature flame of FCCM ensures complete sulfur conversion
- No maintenance of FCCM expected in first two years of service
- No pure oxygen required as a utility gas
- Single and multiple sequenced stream configurations available
- Class I Div 1 (Zone 1) and Class I Div 2 (Zone 2) configurations available
The undesirable sulfur compounds present (i.e. H2S, DMS, COS, CH3SH, CS2, etc) are converted into sulfur dioxide (SO2) under precisely controlled temperature and flow conditions.
When SO2 is exposed to UV light energy, hv1, it creates an "excited" form of sulfur dioxide, SO2*. A molecule in a high, vibrational level of the excited state, SO2*, will quickly fall to its lowest vibrational level by losing energy to other molecules through collision. Fluorescence occurs when the molecule returns to its electronic ground state. The intensity of the emitted light, hv2, is directly proportional to the total sulfur content found in the sample.
TAI'S Model 6400-TSG utilizes a flame combustion converter module (FCCM) which provides a complete combustion conversion of the sulfur compounds present under the intensity of a hydrogen flame. The FCCM approach is best suited for gas phase applications where the analyzed sample is either steady-state or having a wide variation in the hydrogen or hydrocarbon content. Furthermore, the FCCM approach also provides a truly continuous analysis providing a real-time indication of the total sulfur content present in the sample gas. The FCCM is capable of oxidizing raw or unrefined fuels without coking and no carrier gas or switching valves are necessary.
The converted sample gas is dried, then fed to the Model 6400E UV Fluorescence Analyzer where the SO2 Analysis takes place and is conveniently displayed as Total Sulfur.
Applications Areas:
- Refinery (Steam Methane Reformer, Flare - Rule 1118, Incoming Fuel)
- Natural Gas Processing Plants (H2S - acid gas removal)
- Carbon Dioxide Quality Control (CDQC)